You can find technical information relating to our products using the menu’s below. However, if you require additional information please use the contact us page of the website
Dimensioned line drawings
TAP SUITABILITY GUIDE
This table is designed to be used as a guide to match your product choice to your plumbing system. See below for more details on water pressure and flow rates.
At Hudson Reed, we are always strivingto improve our products with the latest technological innovations and engineering techniques. Using high quality components, our products are tested to the most stringent standards,and most are designed to suit the pressure supplies found in most UK households
Our extensive range offers many features to choose from. With this in mind we've designed a set of usefulicons to easily identify which featuresapply to each product.
Low Pressure 1 = 0.1 Bar minimum
Suitable for all plumbing systems, including conventional gravity-fed systems with a minimum 0.1 bar pressure and above.
Low Pressure 2 = 0.2 Bar minimum
Suitable for all plumbing systems, including conventional gravity-fed systems with a minimum 0.2 bar pressure and above.
Medium Pressure = 0.5 Bar minimum
More suitable for modern pressurised plumbing systems and requires a minimum 0.5 bar pressure or above.
High Pressure 1 = 1 Bar minimum
More suitable for modern pressurised plumbing systems and requires a minimum 1 bar pressure or above.
High Pressure 2 = 2 Bar minimum
More suitable for modern pressurised plumbing systems and requires a minimum 2 bar pressure or above.
Our range of 'Eco-Flow' water regulators restrict the maximum flow rate to 6 litres per minute.
The flow regulators are a quick and cost-effective way to reduce your water usage.
With the introduction of new Part G Building regulations in 2011, the focus on water efficiency will be more important than ever. At Hudson Reed, we are committed to contributing towards the sustainability of our precious natural resources.
Our 'Eco-Click' mono basin mixers are water efficient fittings featuring a specially designed 'Eco-Click' cartridge, allowing you to select reduced or full flow from the tap. Click to the first setting for 50% flow rate or click again to achieve full flow.
Appropriate products have been extensively tested by the WRc and are approved or pending approval to comply with the Water Regulations Advisory Scheme.